SDSHobby
EME60 60CC GASOLINE ENGINE/ PETROL ENGINE FOR RC MODEL GASOLINE AIRPLANE
| Displacement | 60cc |
| Weight | 1390g/engine, 180g/muffler, 140g/ignition module |
| Carburetor | Walbro |
| Compression Ratio | 7.6 |
| Power | 6.2HP@7200RPM |
| Idle RPM | 1350RPM |
| Practical RPM | 1350~7500RPM |
| Thrust 1 | 16.2kgf (50~200M altitude) |
| Thrust 2 | 14.7kgf (1800~2000M altitude) |
| Spark Plug | EME/ NGK CM6 |
| Ignition Voltage | 4.8V~6.0V |
| Fuel | 91~93 Octane, 1 |
| Recommended Propeller | 2 blades, 23*10, 24*8, 24*10(wooden prop, C.F. prop) |
| Spacer screw | M5*15 (front), 4pcs; M5*22 (rear), 4pcs |
| Spacer washer | M5*4 for rear mounting spacers |
Specifications:, Package Contents:, EME60 engine*1pcs,
Muffler*1pcs Ignition module*1pcs Spark plug*1pcs Stand-off spacer*4pcs Muffler screw*2pcs Muffler ...SDSHobby
EME35 35CC GASOLINE ENGINE/ PETROL ENGINE FOR RC MODEL GASOLINE AIRPLANE
| Displacement | 35cc |
| Weight | 960g/engine, 45g/muffler, 140g/ignition |
| Carburetor | Walbro |
| Compression Ratio | 7.6 |
| Power | 3.6HP@7100RPM |
| Idle RPM | 1550RPM |
| Practical RPM | 1550~7500RPM |
| Thrust 1 | 9.0kgf (50~200M altitude) |
| Thrust 2 | 8.1kgf (1800~2000M altitude) |
| Spark Plug | EME/ NGK CM6 |
| Ignition Voltage | 4.8V~6.0V |
| Fuel | 91~93 Octane, 1 |
| Recommended Propeller | 2 blades, 18*10, 19*10, 20*8(wooden prop, C.F. prop) |
| Spacer screw | M5*15 (front), 4pcs; M5*22 (rear), 4pcs |
| Spacer washer | M5*4 for rear mounting spacers |
Specifications:, Package Contents:, EME 35 engine*1pcs,
Muffler*1pcs Ignition module*1pcs Spark plug*1pcs Stand-off spacer*4pcs Muffler screw*2pcs Muffler ...SDSHobby
EFUEL RC AC/DC 15V 4A ADAPTOR POWER
| Input | AC 100-240V 50/60Hz 1.5A |
| Output | DC 15V 4A |
| Circuit power | 60W |
Specifications:,
LED indicator for power onSDSHobby
EFUEL RC MODEL AC 220V DC 6-15V 20A ADAPTOR POWER
| Input Voltage | 220-240V AC (Part No. PSU20ADU, PSU20AU) |
| Input AC Frequency | 50Hz/60Hz |
| Output Voltage | 6-15V DC±0.5V |
| Output Current | 20A±1A |
| Current Overload Protection | ≤21A 500MS |
| Input Fuse | 220V AC 3.15A Fuse |
| LCD Display | Voltage Precision ±0.3V; Current Precision ±0.3A |
| Output Voltage Ripple | L<100MV |
| Power Efficiency | >80% |
| Power Factor | >0.7 |
| Over Temperature Protection | <100°C |
| Cooling Method | Cooling Fan |
| Operating Temperature | 0-40°C |
| Operating Humidity | 0-90% |
| Dimensions (L*W*H) | 184.5*92*50mm |
| Net weight | 908g |
Features:, , Introduction:, , Kindly Remark:,
Specifications : Two 15 volts power outputs, up to 20 ...SDSHobby
EFUEL RC MODEL AC 220V DC9-18V 30A ADAPTOR POWER
| Input Voltage | 220-240V AC (Part No.PSU30ADE,PSU30AE) |
| Input AC Frequency | 50Hz/60Hz |
| Output Voltage | 9-18V DC±0.5V |
| Output Current | 30A±1A |
| Current Overload Protection | ≤31A 500MS |
| Input Fuse | 220V AC 5A Fuse |
| LCD Display | Voltage Precision ±0.3V |
| Output Voltage Ripple | <100MV |
| Power Efficiency | >80% |
| Power Factor | >0.7 |
| Over Temperature Protection | <100°C |
| Cooling Method | Cooling Fan |
| Operating Temperature | 0-40°C |
| Operating Humidity | 0-90% |
| Dimensions (L*W*H) | 208x139x59.5mm |
| Net weight | 1.50kg |
Specifications:,
Current Precision ±0.5ASDSHobby
DIY HACKSAW FOR RC MODEL WITH LENGTH 25CM
Specifications:, Total Length:, 5CM, Total Width:, 10CM, Material:, plastic handle, metal bracket, Color:,
Red & Black, Black & Yellow (sent randomly)SDSHobby
DJ80-V2 80CC GAS ENGINE/ PETROL ENGINE WITH SINGLE CYLINDER FOR RC GAS AIRPLANE
| 30 (lube oil) | 1 (gasoline) |
Performance & Parameters:, Spark Plug:, NGK CM-6, Carburetor:, Walbro (made in Japan), Displacement:, 80CC, Output Power:, 8.2HP/8000rpm, Weight:, 1800g (NOT Including CDI and Muffler), Cylinder Diameter:, 52mm, Stroke:, 38mm, RPM Range:, 1200 to 8000RPM, Recommended Propeller:, 3*10~26*8 (NOT Included), Compression Ratio:, 7.8, Mixture Ratio:, Package Contents:, Kindly Remark:,
DJ80-V2 engine*1pcs Exhaust Pipe*1pcs Rcexl CDI Ignition*1pcs Installation Parts*1pcs Propeller ...SDSHobby
BRUSHLESS MOTOR 5010 360KV FOR RC QUADCOPTER, MULTICOPTER
Specifications:, Motor Diameter:, 50mm, Motor Height:, 10mm, Shaft Diameter:, 3.17mm, KV Value:, 360, Wire Length:, 40cm, Net Weight:, 95g, Recommended Battery:, -5S Li-Po, Recommended ESC:, 10A, Recommended Prop:, 14 inch/ 15 inch E-prop, Application:, used for MO1200L-R, MO1200L-A, Feature:,
, MH1200L -R, MH1200L-A Multicopter Machined aluminum front housing with ...SDSHobby
BRUSHLESS 50A SPEED CONTROL WITH WATER COOLING MADE IN TAIWAN FOR RC BOAT
| Weight | 37g |
| Size | 44.5mm x 26.2mm/ 46mm x 28mm |
| Protection Function | Over-heat protection(120°C), Low voltage cut-off protection (3V/cell for lithium battery) |
| Operation Voltage | DC 6V-12.6V/ 2S-3S lithium battery |
| Continuous Current | 45A~50A |
| Burst Current | 60A/15s |
| BEC Output | 2A (Continuous Current), 2.5A (Burst Current) |
| Support for Servo Quantity | 2 cells Lipo battery(7.4V) for 4pcs 9g servo |
| Throttle | linearizing design provides smooth speed and good performance. |
| Protection Function | Over-heat protection, low voltage cut-off protection for battery. |
| Program Set | Brake/No brake can be easily switched via program. |
Features:, Start-up: compatible with various brushless motors and with low torsion start-up protection function for gear box., Run Mode: suitable for brushless motor with multiple poles and high KV value, excellent low speed characteristic, automatic timing adjustment., Operation Efficiency: super efficient and powerful crystal circuit design combined with low resistance, not easy to get heated.,
Specifications : 3 cells Lipo battery (11.1V) for 3pcs 9g ...SDSHobby
BRUSHLESS 30A SPEED CONTROL WITH WATER COOLING MADE IN TAIWAN FOR RC BOAT
Specifications:, , Weight:, 1g, Size:, 44.5mm x 26.2mm/ 46mm x 28mm, Protection Function:, Over-heat protection(120, Operation Voltage:, DC 6V-12.6V/ 2S-3S lithium battery, Continuous Current:, 5A~30A, Burst Current:, 35A/15s, BEC OUTPUT:, A (Continuous Current), 2.5A (Burst Current), Support for Servo Quantity:, cells Lipo battery (7.4V) for 4pcs 9g servo, Features:, Throttle:, linearizing design provides smooth speed and good performance., Start-up:, compatible with various brushless motors and with low torsion start-up protection function for gear box., Run Mode:, suitable for brushless motor with multiple poles and high KV value, excellent low speed characteristic, automatic timing adjustment., Protection Function:, Over-heat protection, low voltage cut-off protection for battery., Program Set:, Brake/No brake can be easily switched via program., Operation Efficiency:, super efficient and powerful crystal circuit design combined with low resistance, not easy to get heated.,
℃ ), Low voltage cut-off protection (3V/cell for lithium battery) ...SDSHobby
BUTTERFLY 3D-25 RC MODEL NITRO AIRPLANE ARF
Specifications:, Wing Span:, 1126mm, Wing Area:, 44.36sq.dm, Length:, , Flying weight:, 900-1000g;, Requirements for Ready to Fly Complete Set (need to buy separately):, Engine:, stroke 25-31A nitro engine or Outrunner brushless motor, Radio:, 4 channels, 5 servos,, Propeller:, 9X5, 10X5, 10X6, Spinner:, 1.5-2inch, Receiver battery:, (suggest item No.:, A123-2SFJ, A123-2ST, NH1200-4, NH1500-4, NH1500-5B, NH1500-5A, NH2000-4, NH2000-5),
1145mm Power Switch Fuel lineSDSHobby
FSD 130-2030 KV5165 INRUNNER BRUSHLESS MOTOR FOR HELICOPTER/ RC CAR/ RC BOAT
Specification:, ):, 5165, Motor Diameter (mm):, 0, Motor Length (mm):, 30, Shaft Diameter (mm):, .3, Banana Plug Diameter(mm):, 3.5, Shaft Length (mm):, 12.5, Total Weight (g):, 50, Max Power (W):, 130, Number of Windings:, 18, Resistance (ohm):, 0.0733, Max Current (A):, 12, No-load Current(A):, 1.2, Number of Poles:, Efficiency:, 90%, Recommended Equipments (need to buy separately):, Ni-Cd/Ni-MH Battery:, 6-9S, Li-Po Battery:, -3S,
KV ( RPM/VSDSHobby
FSD 130-2030 KV7782 INRUNNER BRUSHLESS MOTOR FOR HELICOPTER/ RC CAR/ RC BOAT
Specification:, ):, 7782, Motor Diameter (mm):, 0, Motor Length (mm):, 30, Shaft Diameter (mm):, .3, Banana Plug Diameter(mm):, 3.5, Shaft Length (mm):, 12.5, Total Weight (g):, 50, Max Power (W):, 130, Number of Windings:, 12, Resistance (ohm):, 0.0325, Max Current (A):, 18, No-load Current(A):, .2, Number of Poles:, Efficiency:, 90%, Recommended Equipments (need to buy separately):, Ni-Cd/Ni-MH Battery:, 6S, Li-Po Battery:, S,
KV ( RPM/VSDSHobby
FIBERGLASS PATRON SAINT RC GASOLINE BOAT/ RACING BOAT WITH JAPAN ZENOAH 29CC GAS ENGINE
| Hull Length | 133mm |
| Hull Width | 38mm |
| Hull Height | 21mm |
| Hull Speed | 70-75km/h |
| Hull Material | Fiberglass |
| Gross Weight | 14KG |
| Engine | Japan Zenoah 29CC Gas engine |
| Propeller | 6717 3 blades copper prop |
| Shaft System | D6.35 Shaft Jointer, D6.35mm Flexible Shaft, D6.35mm Drive Shaft without Teeth, D6.35mm Drive Dog |
| Radio Control System | 2.4G 2 channels or 3 channels (Our Item No. |
| Servo | 6kg-cm Throttle Servo, 15kg-cm Steering Servo with metal gears |
Specifications:, Recommended Equipments (need to buy separately):,
NOT Including ClutchSDSHobby
FIBERGLASS NC007 RC GASOLINE CATAMARAN BOAT WITH QJ 26CC GAS ENGINE
| Hull Length | 1380mm |
| Hull Width | 500mm |
| Hull Height | 325mm |
| Hull Speed | 50-60km/h |
| Hull Material | fiberglass |
| Hull Design | Catamaran |
| Gross Weight | 17KG |
| Engine | QJ 26CC gas engine |
| Propeller | 478 aluminum prop |
| Shaft System | 6.35mm drive shaft with teeth, D5mm drive dog |
| Radio Control System | 2.4G 2 channels or 3 channels (Our Item No. |
| Servo | 6kg-cm Throttle Servo, 15kg-cm Steering Servo with metal gears |
Specifications:, Recommended Equipments (need to buy separately):,
NOT Including Clutch